More Vacancies at Deep Blue Energy Services

Started by NJD, May 18, 2013, 09:30 PM

NJD



1) Oil Offloading lines and flexible leader About this jobACTIVITIES

The OOLs and Flexibles Leader will be eventually responsible for the delivery of the OOLs and Flexible Jumpers, in accordance with Contracts requirements, in particular technical requirements and schedule, ensuring all aspects of the EPCI works are accounted for in due time. This means:

  • Managing the OOLs/ Flexible Jumpers Detailed Engineering / Qualification / Procurement activities performed by Contractor
  • Following up Manufacturing, Fabrication, Installation and Pre-commissioning activities performed by UFR Contractor and managed by inspection, construction and installation teams
To this objective, the OOLs/ Flexible Leader will be in charge of:
  • Reviewing of all relevant Engineering / Qualification / Procurement documentation, ensuring the adequate level of priority is given
  • Ensuring that Engineering / Qualification / Procurement activities are performed in line with Contracts requirements and Project Specifications, all within project schedule
  • Ensuring that Engineering / Qualification / Procurement activities are performed in line with TOTAL General Specifications and issue proper derogations, if required
  • Ensuring that Engineering activities are progressed to a sufficient level before the start of Qualification, Procurement, Manufacturing an
  • Ensuring that design and qualification outcomes/ constraints are adequately considered in due time for Procurement, Manufacturing, Fabrication, Installation and Pre-commissioning, and vice/ versa
  • Ensuring that for the Manufacturing and Fabrication of critical items, ITPs are reviewed in due time by the relevant parties and are given the right level of attention
  • Assisting Manufacturing, Fabrication, Installation and Pre-commissioning activities and leading the resolution of technical issues when necessary
  • Assisting in interface management with UFR, FPSO, OLT buoy Contractors
  • Answering UFR Contractor technical queries as necessary
  • Ensuring that HSE requirements are taken into consideration during design
  • Getting assistance from dedicated Team specialists (such as flexible, hydrodynamics, structural, material & welding, corrosion & coating, etc ...)
  • Getting assistance from COMPANY specialists, or third parties, if required, for specific topics
  • Providing inputs to contract correspondence, as necessary
  • Issuing reports and presentations as necessary
  • Participating in various technical reviews (Hazids, Hazops, Project Technical Reviews, Risk Assessments...) and ensuring implementation of recommendations as necessary
HSE
  • To ensure that all safety and environmental required studies will be reviewed/updated and that final design will comply with ALARP policy.
  • To ensure that design will comply with all HSE requirements and that Safety and Environment dossiers will be provided to National Authorities in due time.
  • To demonstrate leadership for implementation of Company requirements on technological risks management.
  • To ensure that all recommendations from safety studies and technical reviews are fully addressed in design phase.
  • To ensure necessary resources are available for preparation of information needed to issue safety and environmental dossiers.
  • To fully comply with office security, health and safety instructions.
  • To stay vigilant and maintain continuous awareness of hazards and surroundings.
  • To report to Management on any issue they may face or observe and propose way of improvement.
  • To also take care of colleagues safety and behavior without hesitating to intervene as much as necessary.
  • To give his own input and making sure the workplace is safe (obviously clean and tidy).
  • In doubt to ask questions to gain clarification.
To fully comply with Security rules about Travelling in Nigeria.

ACCOUNTABILITIES
  • Reports directly to the Risers System Lead of flexible jumpers and Technical Manager for OOLs
  • Accountable for the delivery of the OOLs/ Flexibles Jumpers, in accordance with Contract requirements, in particular technical/ HSE requirements, within schedule and without undue change to the scope
NECESSARY PROFILE
  • Graduate degree in a relevant engineering discipline MANDATORY (copy of diploma to be provided) with MSc or equivalent. Pending experience candidates with BSc may be also given consideration
  • 7 years experience in flexible/ dynamic riser engineering, hydrodynamics for deepwater Projects (pending profile, candidates with less experience and previous exposure to UFR EPCI projects will be also given due considerations). Relevant experience will include development of detail design specifications, performance and / or validation of detail design calculations for flexible lines, follow-up of fabrication and installation activities
  • Good knowledge of international design codes / standards and COMPANY general specifications
  • Good sense of organization, ability to prioritize activities, to identify critical aspects, to propose way forwards, to lead specialists or third parties, to summarize and present complex design issues including transverse and interfaces matters
  • Some basic knowledge in structural design and flow-assurance will be also valuable
  • Some basic knowledge in material, corrosion, coatings will be also valuable
  • Fluent in English both verbally and in writing
  • Apply now  
2) Interface Engineer ACTIVITIES

Within the project's organization, the  Interface Engineer" wiII be reporting to the  Interface Leader" for the duration of the project. The " Interface Engineer" will monitor the interfaces among (umbilicals, offloading lines, Buoy-anchors, and offshore works) to secure: compliance with the schedule, consistent design basis and data set at the package interfaces, overall UFR packages design consistency and integrity at interface with UMB and OLT.

In such a context, the  Interface Engineer" essential scope of work will be defined as follows:
  • Monitor the interfaces among UFR package, UMB and OLT package
  • Control the effectiveness of the flow of information at the boundaries of the UFR package with UMB and OLT, in terms of content and delivery time.
In order to reach such a target he will have:
  • To be familiar with subsea projects development,
  • To have a good technical knowledge on the specific subject,
  • To be confident with main aspects of interfaces coordination,
  • To have strong attitude for team work and cooperation with the other team members,
  • To become fuIIy knowledgeable with use of eRoom to manage Interfaces.
During the execution phase, keeping above tasks and responsibilities, he will have in addition to :
  • Close control the key interfaces among the UFR packages and ensure adequate attention is paid in preventing any negative (cost, CFT and project schedule) impact on such packages.
  • Contribute to the promotion of a 'no change' policy at interfaces in order to preserve Project Schedule.
  • In case of unavoidable changes give support in ensuring that complete resolution of such changes is managed across all the UFR packages and follow-up necessary updates.
  • Promote and stimulate effective communication among the parties involved, especially among the team leaders and engineers of UFR sub packages.
  • Contribute to promote technical cooperation in the UFR packages team and with bidders in order to minimize technical and economical risks due to interfaces.
  • Participate on regular basis to the interface meetings, as necessary, with the different contractors in order to follow-up interfaces qualification / clarification, giving support in negotiating the best resolution of UFR packages interface discrepancy.
  • Support the UFR Interface Leader in keeping abreast of other projects feedback, experience, know-how, implementing best practices where applicable and relevant to the project phase.
  • Support the introduction of new tools (as necessary) to assure technical interfaces integrity and traceability of agreements/changes.
  • Maintain any required register and / or the adequate use of interface managing tools such as eRoom.
  • Monitor the assigned interfaces in order to guarantee that they are executed and completed in accordance with project objectives, follow-up that such interfaces are formally closed and approved by all parties before the design is frozen.
  • Monitor, update and record revision and status of interfaces, giving contribution to interface status reports (including progress status, identification of any areas of concern and main highlights).
  • Contribute in ensuring the overall technical integrity of the assigned interfaces.
  • Monitor the data flow across the mentioned project package/contractor interfaces to ensure coherence with design basis and data set, overall design consistency and integrity, compliance with the project schedule.
HSE
  • To ensure that all safety and environmental required studies will be reviewed/updated and that final design will comply with ALARP policy.
  • To ensure that design will comply with all HSE requirements and that Safety and Environment dossiers will be provided to National Authorities in due time.
  • To demonstrate leadership for implementation of Company requirements on technological risks management.
  • To ensure that all recommendations from safety studies and technical reviews are fully addressed in design phase.
  • To ensure necessary resources are available for preparation of information needed to issue safety and environmental dossiers.
NECESSARY PROFILE
  • Graduate degree in a relevant engineering discipline that relates to industry at large and preferably to Petroleum
  • Industry activities (minimum B.Sc.) MANDATORY (copy of diploma to be provided)
  • At least 5 years of experience in the industry, preferably with practice of Oil & Gas industry for offshore and subsea works.
  • Fluent in English both verbally and in writing.
  • Previous team work experience.
  • Basic knowledge of Project Management (preferable).
  • Basic knowledge of international design codes / standards and COMPANY general specifications (preferable).
  • Practice of offshore works (preferable)
 Apply now  

Naija Jobs Daily Alert