Massive Vacancies at Wire-Teks International Company Limited - (11 Positions)

Started by jobber, May 21, 2013, 03:30 AM

Print
Go Down Pages1
User actions

jobber

May 21, 2013, 03:30 AM
  Wire-Teks International Company Limited is a Nigerian based company with specialist interest in the field of Energy, Engineering, Environmental, Transportation and

Logistics Services.

The  company also engages in the procurement and supply of electrical,  technical, and/or products related to the above field in order to meet the needs of our esteem clients and prospective customers both in Rivers State, Nigeria in general and West African at Large.Backed  by our expatriates, technical partners Wire-teks has actually been  equipped with practical experience in the above field for more than 19  years and have made name for itself in the Nigerian power supply and  electrification sector.Wire-Teks is recruiting to fill the following positions of:
[tr][td]      JOB /   POSITION[/td][td]                         REQUIREMNTS[/td][/tr][tr][td]1) Site Superintendent[/td][td]

Qualification: Minimum of Bsc /  B.Eng in Engineering or its equivalent.[/td][/tr][tr][td] [/td][td] Experience:  Minimum of 10 years in Oil and Gas surface facilites as a Construcion  or Project or Site Superintendent. Acquaitance with international  standards: API, ASTM, ASME, IEC, BS, IEEE, IP Codes, NEC, NACE, ISO,  etc.

Good knowledge of HSE - HSE Management Sysytem, work permit system, risk assessment, safety talks, incident analysis etc

Ability  to coordinate & lead mulitiple discilinary teams of E& I,  QA/QC, Civil, Piping, Mechanical, and Safety supervisors.

Good knowledge of inspection & control of mechanical, piping Civil, E&I works

Good knowledge of precomm & commissioning activities

Ability  to monitor & drive the overall progress of contractors on site to  ensure Projects are completed and handed over on schedule.

APPLY HERE[/td][/tr][tr][td]2) Site Supervisor -

Piping and Mechanical[/td][td]Qualification: Minimum of Bsc /  B.Eng in Engineering or its equivalent.[/td][/tr][tr][td]

[/td][td]Experience:  Minimum of 5 years in Oil and Gas surface facilites as a Piping,  Mechanical, Construction or Project  Site Supervisor. Acquaitance with  international standards: API, ASTM, ASME, BS, ISO. Good knowledge of  QA/QC documentation and HSE -  work permit system, risk assessment,  safety talks, incident analysis etc

Good knowledge inspection and  control dimension of structure steel, piping, equipment and supports  during fabrication and installation.

Ability to implement schedule,  execute, project procedure and ensure that all deliverables are  completed on time, comply to quality standard in accordance with project  schedules

Ability to supervise and control the resources of piping /  structural fabrication, inspection, testing, installation and  commissioning.

Ability to to establish and maintain a good working  relationship with the Contractor's personnel and to provide positive  input to methods and solutions for improvement

APPLY HERE[/td][/tr][tr][td]

3) Site Supervisor - Civil

[/td][td]

Qualification: Minimum of Bsc /  B.Eng in Civil or Building Engineering  or its equivalent[/td][/tr][tr][td] [/td][td]Experience: Minimum of 5 years in Oil and Gas environment as Site Supervisor.

Good knowledge of QA/QC documentation and HSE -  work permit system, risk assessment, safety talks, incident analysis etc

Implement  schedule, execute, project procedure and ensure that all deliverables  are completed on time, comply to quality standard in accordance with the  project schedules

Supervision and control / monitors of  contractors'work execution to ensure compliance with scope, design,  specifications, drawings, quality and planning.

Ability to establish  and maintain a good working relationship with the Contractor's personnel  and to provide positive input to methods and solutions for improvement

APPLY HERE[/td][/tr][tr][td]4) Site Supervisor-E & I[/td][td]

Qualification: Minimum of Bsc /  B.Eng in Electrical Engineering Instrumentation   or its equivalent[/td][/tr][tr][td]

[/td][td]Experience: Minimum of 5 years in Oil and Gas surface as a Construction or Project or Site Supervisor.

Good knowledge of HSE -  work permit system, risk assessment, safety talks, incident analysis etc

Acquaitance with international standards: API, ASTM, ASME, IEC, BS, IEEE, IP Codes, NEC, NACE, ISO, etc.

Good knowledge of QA/QC documentation and review of Engineering documentation.

Ability to inspect, regulate, control and documentation and procured E & I / systems materials and equipment.

APPLY HERE[/td][/tr][tr][td]

5) Construction Engineer

[/td][td]

Qualification: Minimum of Bsc /  B.Eng in Mechanical Engineering or its equivalent[/td][/tr][tr][td]

[/td][td]Experience: Minimum of 5 years in Oil and Gas surface facilites as a Piping, Mechanical, Construction or Project Engineer.

Acquaitance with international standards: API, ASTM, ASME,  BS, ISO.

Good knowledge in technical - commercial aspects of tendering and contracting

Good knowledge in technical - commercial aspects of tendering and contracting

Good knowledge of QA/QC documentation and HSE - work permit system, risk assessment, incident analysis etc

Ability  to implement schedule, execute, projectprocedure and ensure that all  deliverables are completed on time and comply with quality standard in  accordance with the project schedules.

Experience in follow-up of material procurement and preparing construction cost estimates for projects.

Ability to supervise site installation works and review all as built documents.

Good  knowledge of inspection and control dimension of structure steel,  piping, equipment and supports during fabrication and installation.

APPLY HERE[/td][/tr][tr][td]

6) Civil Engineer[/td][td]

Qualification: Minimum of Bsc /  B.Eng in Civil Engineering or its equivalent[/td][/tr][tr][td]

[/td][td]Experience: Minimum of 5 years in Oil and Gas environment as a Civil Engineer.

Acquaitance with international standards: ASTM, ACI, British / Euro Standards (BS/EN), AASHTO etc

Good knowledge of QA/QC documentation and HSE - work permit system, risk assessment, safelty talks, incident analysis etc

Good knowledge of technical & commercial dossiers for tendering and contracting.

Ability  to implement schedule, execute, project procedure and ensure that all  deliverables are completed on time, comply to  quality standard in  accordance with the project schedules.

Experience in follow-up of material procurement and preparing construction cost estimates for projects.

Ability to perform Civil and Structural analysis / design and technical review of Civil/ Structural deliverables.

APPLY HERE[/td][/tr][tr][td]

7) Material Controller

[/td][td]

Qualification: Minimum of Bsc /  B.Eng in Civil Engineering or its equivalent[/td][/tr][tr][td]

[/td][td]Experience: Minimum of 5 years in Oil and Gas environment as a Material Controller.

Ability to use SAP efficiently.

Good knowledge of stock management system

Ability  to ensure that any applicable safety rules are implemented by the staff  involved, especially regarding hazardous goods, and that  the equipment  preservation procedures is properly and duly implemented throughout the  duration of the contract

[/td][/tr][tr][td]8) Senior Electrical Engineer[/td][td]Qualification: Minimum of Bsc /  B.Eng in Electrical Engineering Instrumentation or its equivalent[/td][/tr][tr][td]

[/td][td]Experience: Minimum of 10 years in Engineering Organization in a similar design position.

Good knowledge of HSE - work permit system, safelty talks, incident analysis etc,

QA/QC documentation and review of Engineering documentation.

Acquaitance with international standards: IEC, API, BS, IEEE, IP Codes, NEC, NACE, ISO, etc.

Working knowledge of Autocad and relevant Engineering design software is an advantage.

Ability to develop design / modify integrated HV and LV electrical systems

Ability to prepare CFT, requisitions for electrical procurements and technical bid evaluation.

APPLY HERE[/td][/tr][tr][td]

9) Senior InstrumentationEngineer[/td][td]

Qualification: Minimum of Bsc /  B.Eng in Electrical Engineering Instrumentation or its equivalent[/td][/tr][tr][td] [/td][td]Experience: Minimum of 10 years in an Engineering Organization in a similar design position.

Good knowledge of HSE - work permit system, safelty talks, incident analysis etc,

QA/QC documentation and review of Engineering documentation.

Acquaitance with international standards: IEC, API, BS, IEEE, IP Codes, NEC, NACE, ISO, etc.

Working knowledge of Autocad and relevant Engineering design software is an advantage.

Ability to develop design / modify integrated HV and LV electrical systems

Ability to develop design of integrated instrumentation systems inbcluding Process Control and Shutdown systems.

APPLY HERE[/td][/tr][tr][td]

10) Contract Engineer

[/td][td]

Qualification: Minimum of Bsc /  B.Eng in Science or Engineering or a degree in business[/td][/tr][tr][td] [/td][td]Experience: Minimum of 5 years in a Multinational company as a contract Engineer

Good knowledge of tender - contract planning & preparation, contract strategy and commercial analysis

APPLY HERE[/td][/tr][tr][td]

11) Advert Executives[/td][td]

Qualification: Minimum of Bsc /  Hnd Marketing[/td][/tr][tr][td] [/td][td]Experience: Minimum of 5 years in a reputable organisation

A good knowledge of Microsoft Office Suite, and interner will be a an advantage

APPLY HERE[/td][/tr]
[/table]

Print
Go Up Pages1
User actions