OilCareers Ref. No.: J964343
APPLY HERE
3) Document Controller(Nigerians only) | The SERVICES consists to report as follows:
Assisting COMPANY the management of technical documents, technical queries and correspondences related to EPCs Contracts, using PRODOM (Electronic Document Management System) and to the maintenance of structured project documentation.
b)
Specific Activities:
,,« Receipt, quality check, dispatch and follow up of technical documentation issued by CONTRACTORS
,,« Transmitting out of commented technical documents, and technical queries to CONTRACTORS
,,« Recording and internal distribution to concerned personnel via EDMS (Prodom) of incoming Correspondences from CONTRACTORS such as : Letters, Minutes of Meeting, Reports ...
,,« Assisting project team with EDMS (Prodom)
,,« Ensuring that Project document management procedures are followed by CONTRACTORS and COMPANY | | | | Status: | Contract | | Required Skills/Experience: | Minimum of 5 years experience on a similar position.
Practice of DOCUMENTUM or equivalent EDMS, Microsoft Office Suite. | | Location: | Lagos, NIGERIA | | Advert Published: | 15 May 2013 | | Expiry date: | 26 May 2013 | OilCareers Ref. No.: J964337
APPLY HERE
4) Safety Inspector | The SERVICE consists:
• To ensure that the CONTRACTOR, other contractors on site, their subcontractors and all personnel on site actually abide by the safety and fire prevention procedures.
b)
Specific Activities:
Ø Participate in, and promote Risk Assessments.
Ø Ensure site pro-active Vigilance on hazards Slips, trips, and falls, electric shocks, work at height, Confined space entry.
Ø Promote and police, the use of PPE, and other applicable safety apparel on the site and set a good example to co-workers.
Ø Carry out Safety Inductions for all new COMPANY project personnel.
Ø Promote and ensure the correct use of PPE when working at height.
Ø Ensure Safety signage is well maintained and suitable for the applicable work area.
Ø Participate in all site Toolbox Talks.
Ø Build and maintain positive working relationships with co-workers of all nationalities. | | | | Status: | Contract | | Required Skills/Experience: | Minimum of 5 years in a similar position, with a Safety Officer background with onshore and or offshore experience
Must possess safety professional certifications | | Location: | Port-Harcourt, NIGERIA | | Onshore: |
| | Offshore: |
| | Advert Published: | 15 May 2013 | | Expiry date: | 21 May 2013 | OilCareers Ref. No.: J964336
APPLY HERE
5)WeldingSupervisor | Aldelia Limited is an international player in Permanent and Contract Staffing specialized in the Energy Sector: Oil, Gas and Renewable Energies.
I am currently looking for our client, an offshore project, for a Welding Supervisor.
Location: Offshore, Nigeria
Status: Single, Rotational 28*28
Start date: January 2013
Duration: 12 months with possible extensionsJOB DESCRIPTIONEnsuring that welding & NDT activities at SITE are fully compliant with Project requirements and identifying and reporting any non-conformance with Project requirements.Specific Activities:
To monitor cutting, forming, welding, post welding and NDT activities by Contractor and ensure that activities are fully compliant with Project requirements, specifications, codes, drawings, etc.
To ensure that welding & NDT record books are properly documented and maintained by Contractor To be aware of the Project specifications and ensure Contractor compliance in relation with Offshore CSR
To perform all Company quality inspections relating to welding & NDT
To promote application of policies, rules, procedures, General Specifications and Project procedures
To identify any non-conformance with Project requirements, report to Offshore CSR and PHC QA/QC Coordinator and follow-up remedial action by Contractor
To ensure that approved modifications are implemented and documented for as-built documentation
To be proactive in anticipating events or Contractor's problems which may affect the successful completion of the Project objectives and inform Offshore CSR
To assist with making of progress records and other key performance indicators
To produce accurate activity report to Offshore CSR
To attend Project meetings as and when requiredSpecific Requirements:
Fluent in English and knowledge of French. | | | | Status: | Contract | | Minimum Experience: | 5 years | | Location: | Offshore, NIGERIA | | Onshore: |
| | Offshore: |
| | Offshore Certificates Required? | | | Advert Published: | 15 May 2013 | | Expiry date: | 29 May 2013 | OilCareers Ref. No.:
APPLY HERE6) Subsea Project Manager -Nigeria | The Subsea Project Manager will lead a multi-disciplined project team to successfully complete all subsea project engineering and management responsibilities. This individual will work closely with a diverse, cross-functional team consisting of engineers (pipeline, subsea and controls) as well as key equipment manufacturers and service providers. | | | | Status: | Contract | | Required Skills/Experience: | Minimum of 15 years experience
Experience of working on subsea projects. | | Location: | Lagos, NIGERIA | | Onshore: |
| | Offshore: |
| | Advert Published: | 14 May 2013 | | Expiry date: | 10 Jun 2013 | OilCareers Ref. No.:
APPLY HERE7) Welding Engineer | The Welding Engineer will be part of QC inspection team and, together with the Material and Welding Specialist, will assist Systems Leaders for all technical matters related to UFR Material and welding activities (Material, fabrication, welding & NDE including line pipe, forgings, bends, umbilical tubing, structural elements, etc ...) performed by UFR, Umbilical and Line Pipe Contractors. He will be in charge of:
• Reviewing relevant Engineering / Qualification / Manufacturing / Fabrication / Testing documents throughout all project phases. This includes typically material selection, specifications, welding procedures, welding qualifications, testing procedures, ITP, technical reports, etc ...
• Assisting in resolution of interface issues as necessary
• Assisting in analysis of UFR Contractor technical queries and preparation of comments and proposed answers to these queries
• Ensuring that Engineering / Qualification / Manufacturing / Fabrication / Testing activities are performed in line with Contract requirement and Project Specifications,
• Ensuring that Engineering / Qualification / Manufacturing / Fabrication / Testing activities are performed in line with COMPANY general specifications and issue proper derogations, if required
• Establishing / updating technical specifications as necessary
• Conducting inspection of VENDOR's facilities as necessary in particular at qualification stage to ensure adherence to qualified process and prevent deviations
• Providing technical assistance and relevant quality controls during pre-fabrication and site construction
• Reporting to the Vendors QC coordinator Material & Welding Specialist / Construction Manager on a regular basis, and to Project's Management upon request
• Proposing technical solutions / way forward in case of unexpected difficulties during the project development.
• Developing and preparing as need be technical reports
• Ensuring that HSE requirements are taken into consideration during design
• Getting assistance from COMPANY Specialists, or third parties, if required, for specific topics
• Getting feedback from other deepwater projects on pipelines and risers
HSE
• Ensuring that HSE requirements are taken into consideration during design
• To demonstrate leadership for implementation of Company requirements on technological risks management.
• To ensure that all recommendations from safety studies and technical reviews are fully addressed in design phase.
Participating in various technical reviews (Hazids, Hazops, Project Technical Reviews, Risk Assessments ...) | | | | Status: | Contract | | Required Skills/Experience: | Material, Welding & NDE Lead Engineer with minimum 3-5 years experience in the Oil and Gas or Petrochemical Industries
• Graduated Welding Engineer (Msc or equivalent)
• Good knowledge of international design codes / standards and COMPANY general specifications
• Knowledge in corrosion aspects | | Location: | Lagos, NIGERIA | | Advert Published: | 14 May 2013 | | Expiry date: | 20 May 2013 | OilCareers Ref. No.:
APPLY HERE (http://www.oilcareers.com/content/jobsearch/job_advert.asp?jobadid=963566) | J963566
| [/t][/t][/t][/t][/t][/t][/t][/t][/t][/t][/t][/t][/t][/t][/t][/t][/t][/t]
|
|
|
|
|