Job Title: Mechanical Commissioning Engineer
Recruiter: Intertek Moody International
Location: Nigeria
Req ID: 9356
MAIN ACTIVITIES:
PRE-COMMISSIONING & COMMISSIONING PREPARATION PHASE: – As leader in his discipline, he is involved in the following tasks:
¤ Review and comments all the commissioning documents, including Operational Test procedures prepared by the Contractor.
¤ Participate to the construction of the commissioning Database as per OPERCOM methodology,
¤ Follow-up the preparation of pre-commissioning/commissioning dossiers. – Responsible to ensure that adequate care and maintenance /preservation procedures of equipment issued by vendors are being carried out during the different steps of the project. – Involved in Factory Test when they take place for OFP2 subcontracted packages and critical equipment. – Involved in witnessing of all the activities to ensure that they are compliant with the Company OPERCOM methodology.
PRE-COMMISSIONING AND COMMISSIONING EXECUTION PHASE (ON THE YARDS): – Insure that the installation of the equipment is properly done with access for the maintenance. – Control the piping preparation / cleaning / drying is done in accordance with the Company requirements, – Participate to the meetings with the vendors – Be proactive to highlight any issue to the Project Management – Witness pre-com activities performed by OFP2 contractor and ensure that, for his discipline, each subsystem dossier has reached the "ready for Commissioning" and "ready for start-up" status with associated punch list. – Review the operational tests preparation done by Contractor for each piping equipment, – With the contractor, review the needs for consumable and temporary equipment required for the commissioning on shore and offshore. – Follow-up the punch list items issued by the Contractor and if deems necessary issue additional items which shall be recorded in the ICAPS system, and follow-up the clearance as per the OPERCOM procedure. – Liaise with the Commissioning Site Leader and the different Systems Engineers and his counterpart in engineering/construction Company team to coordinate his activities and make sure the progress is in line with the Project planning.
PRE-COMMISSIONING AND COMMISSIONING EXECUTION PHASE (OFFSHORE): – To supervise the execution of commissioning of piping, To plan the mobilisation of the Vendors in accordance with the Project planning and the commissioning progress. – To monitor and to follow up the execution of offshore completion activities to achieve the commissioning safely and prepare a smooth hand over the Production team. – To validate the results of the functional and operational tests. – To manage the commissioning punch list, issue new items if necessary and follow-up the clearance as per OPERCOM procedure in close cooperation with the construction team.
OTHER:
All during the Project wherever it is, strictly follow the Company requirement in term of safety: – Follow-up the procedures – Actively participate to the safety meetings – Lead when required the Job risk analysis meetings – Participate to the work permits dossiers preparation – Make sure the execution of the activity is done in line with the work permit and be committed to stop any unsafe acts. – Report any anomaly, unsafe act for further analysis and propose corrective actions – As team leader for the mechanical activities he is accountable for the mechanical isolation of any equipment on which activities is ongoing under a valid work permit up to the closure of the said work permit.
B.Sc. Engineering Civil, Structural/mechanical engineering
Professional Experience:
• Between 10-15 years solid working experience in Oil & Gas project activities and familiar with power generation (Rolls Royce) and compressors (Thermodyn) as well as HV electrical Installation.
• Good knowledge of Opercom methodology will be an advantage
Apply to this job (http://www.jobnavy.com/job/19994/mechanical-commissioning-engineer-job-at-intertek-moody-nigeria/)