Author Topic: Mechanical Commissioning Lead Engineer - Nigeria Job at Intertek Group Plc  (Read 277 times)


  • Freelancer
  • *****
  • Posts: 32405
  • Rating: +0/-0
Job Title: Mechanical Commissioning Lead Engineer

Auto req ID: 4147BR

Location: Off-Shore, Nigeria

Recruiter: Intertek Group Plc

Job Description:  – Precommissioning and commissioning being done by the Contractor in charge of the engineering and construction of the facilities the personnel from the Company will have to control, follow-up the activities done by the Contractor on his yard in Korea.  – When the platform is offshore the commissioning will be directly controlled by the Company the personnel from Company will lead the commissioning activities and the preparation for the start-up.

Specific Activities PRE-COMMISSIONING & COMMISSIONING PREPARATION PHASE :  – As leader in his discipline, he is involved in the following tasks: •   Review and comments all the commissioning documents, including Operational Test procedures prepared by the Contractor. •   Participate to the construction of the commissioning Database as per OPERCOM methodology, •   Follow-up the preparation of pre-commissioning/commissioning dossiers.  – Responsible to ensure that adequate care and maintenance /preservation procedures of equipment issued by vendors are being carried out during the different steps of the project.  – Involved in Factory Test when they take place for OFP2 subcontracted packages and critical equipment.  – Involved in witnessing of all the activities to ensure that they are compliant with the Company OPERCOM methodology. PRE-COMMISSIONING AND COMMISSIONING EXECUTION PHASE (ON THE YARDS) :  – Insure that the installation of the equipment is properly done with access for the maintenance.  – Control the piping preparation / cleaning / drying is done in accordance with the Company requirements,  – Participate to the meetings with the vendors  – Be proactive to highlight any issue to the Project Management  – Witness pre-com activities performed by OFP2 contractor and ensure that, for his discipline, each subsystem dossier has reached the “ready for Commissioning” and “ready for start-up” status with associated punch list.  – Review the operational tests preparation done by Contractor for each piping equipment,  – With the contractor, review the needs for consumable and temporary equipment required for the commissioning on shore and offshore.  – Follow-up the punch list items issued by the Contractor and if deems necessary issue additional items which shall be recorded in the ICAPS system, and follow-up the clearance as per the OPERCOM procedure.  – Liaise with the Commissioning Site Leader and the different Systems Engineers and his counterpart in engineering/construction Company team to coordinate his activities and make sure the progress is in line with the Project planning. PRE-COMMISSIONING AND COMMISSIONING EXECUTION PHASE (OFFSHORE) :  – To supervise the execution of commissioning of piping, To plan the mobilisation of the Vendors in accordance with the Project planning and the commissioning progress.  – To monitor and to follow up the execution of offshore completion activities to achieve the commissioning safely and prepare a smooth hand over the Production team.  – To validate the results of the functional and operational tests.  – To manage the commissioning punch list, issue new items if necessary and follow-up the clearance as per OPERCOM procedure in close cooperation with the construction team.

All during the Project wherever it is, strictly follow the Company requirement in term of safety:  – Follow-up the procedures  – Actively participate to the safety meetings  – Lead when required the Job risk analysis meetings  – Participate to the work permits dossiers preparation  – Make sure the execution of the activity is done in line with the work permit and be committed to stop any unsafe acts.  – Report any anomaly, unsafe act for further analysis and propose corrective actions  – As team leader for the mechanical activities he is accountable for the mechanical isolation of any equipment on which activities is ongoing under a valid work permit up to the closure of the said work permit.

Profile:  – Qualification : B.Sc. Engineering Civil, Structural/mechanical  – Professional Experience : Between 10-15 years solid working experience in Oil & Gas project activities and familiar with rotating equipment particularly turbo generators (Rolls Royce) and compressors (Thermodyn). – Good knowledge of Opercom methodology will be an advantage.

Good ability to organize and manage a team and coordinate his activities and responsibilities with other entities of the project (Package managers, other Commissioning entities and Field Operations Team)

Requirements: Must have Offshore experience and valid BOSIET.

Application Hints:

•   Register or Login

•   Click on “Apply on Company’s Website”

•   Click on “Search Openings”

•   Enter “Auto req ID” and then click on “Search”

Apply to this job

The InfoStride Forum